Install the thread support
nuts (J 28467-33A) onto the strut attaching studs.
Install the strut tower support assemblies (J 28467-5A)
over the thread support nuts (J 28467-33A).
Install the T-bolts (J 28467-53) with 5/16 inch
washers through the strut tower support assemblies (J 28467-5A) into
the thread support nuts (J 28467-33A). Hand tighten the bolts.
Install the 2 cross bracket assemblies (J 28467-1A)
over the strut tower tube (J 28467-3).
Install the strut tower tube (J 28467-3) into the strut
tower support assemblies (J 28467-5A).
Install the 1/2 inch x 2.5 inch quick release pin (J 28467-10)
through the strut tower support assemblies (J 28467-5A) and the strut
tower tube (J 28467-3) on one side only.
Install the radiator shelf
tube (J 28467-2A) through the driver side cross bracket assembly (J 28467-1A)
on the top of the strut tower tube (J 28467-3).
Place the rubber padded foot of the front support assembly (J 28467-4A)
on the vehicle radiator shelf. The foot position used in the front support
assembly (J 28467-4A) depends on the vehicle application.
Install the 7/16 inch x 2.0 inch quick release pin (J 28467-9)
through the hole in the front support assembly (J 28467-4A) in order
to level the radiator shelf tube (J 28467-2A). The hole used
in the front support assembly (J 28467-4A) depends on the vehicle
application.
Install the lift hook (J 28467-7A) through the lift hook
bracket (J 28467-6A).
Install the 1/2 inch lift hook washer and lift hook wing nut (J 28467-34)
onto the lift hook (J 28467-7A).
Install the assembled lift hook bracket (J 28467-6A) over
the radiator shelf tube (J 28467-2A).
Adjust the radiator shelf tube (J 28467-2A) and the assemblage
lift hook bracket (J 28467-6A) in order to align the hook with the
left (front), rear of engine, lift hook bracket part of the left engine
mount strut bracket.
Hand tighten the driver
side cross bracket assembly (J 28467-1A) wing nuts.
Install the second radiator
shelf tube (J 28467-2A) through the passenger side cross bracket assembly
(J 28467-1A) on the top of the strut tower tube (J 28467-3).
Place the rubber padded foot of the front support assembly (J 28467-4A)
on the vehicle radiator shelf. The foot position used in the front support
assembly (J 28467-4A) depends on the vehicle application.
Install the 7/16 inch x 2.0 inch quick release pin (J 28467-9)
through the hole in the front support assembly (J 28467-4A) in order
to level the radiator shelf tube (J 28467-2A). The hole used
in the front support assembly (J 28467-4A) depends on the vehicle
application.
Install the lift hook (J 28467-7A) through the lift hook
bracket (J 28467-6A).
Install the 1/2 inch lift hook washer and lift hook wing nut (J 28467-34)
onto the lift hook (J 28467-7A).
Install the assemblage lift hook bracket (J 28467-6A) over
the radiator shelf tube (J 28467-2A).
Adjust the radiator shelf tube (J 28467-2A) and the assemblage
lift hook bracket (J 28467-6A) in order to align the hook with the
right (rear), front of engine, lift hook bracket located next to the
generator.
Hand tighten
the passenger side cross bracket assembly (J 28467-1A) wing nuts.
Hand tighten the lift hook wing nuts (J 28467-34) securely
in order to remove all slack from the engine support fixture assembly.