GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Malibu 🢒 Engine 🢒 Engine Electrical 🢒 Engine Mount Replacement

Removal Procedure

    Object Number: 63031 Size: SH
  1. Support the engine by the oil pan.
  2. Remove and position cruise control module aside.
  3. Remove the engine mount to engine mount bracket bolts.

    4. Object Number: 63029 Size: SH
  4. Remove the engine mount to body nuts.
  5. Remove the engine mount.

Installation Procedure

    Object Number: 63029 Size: SH
  1. Install the engine mount.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the engine mount to body nuts.

    3. Tighten
    Tighten the engine mount to body nuts to 66 N·m (49 lb ft).


    Object Number: 63031 Size: SH
  3. Install the engine mount to engine mount bracket bolts.

    4. Tighten
    Tighten the engine mount to engine mount bracket bolts to 130 N·m (96 lb ft).

  4. Install the cruise control module to bracket.
  5. Remove the floor jack.