GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 743400  Size: SH
  1. With a flat-bladed tool remove the ignition switch trim cover.

  2. Object Number: 743402  Size: SH
  3. With a flat-bladed tool remove the accessory trim plate from the from the I/P carrier.
  4. Disconnect the cigar lighter electrical connector from the cigar lighter.
  5. Remove the cigar lighter from the accessory trim plate if required. Refer to Cigar Lighter Housing Replacement .

Installation Procedure


    Object Number: 752088  Size: SH
  1. Install the cigar lighter to the accessory trim plate if required. Refer to Cigar Lighter Housing Replacement .
  2. Connect the cigar lighter electrical connector to the cigar lighter.
  3. Align the accessory trim plate tabs to the I/P carrier.
  4. Press the accessory trim plate into the I/P carrier until retaining tabs are engaged.

  5. Object Number: 743398  Size: SH
  6. Align the ignition key trim cover to the ignition switch. Press the trim cover until retaining tabs are engaged.