GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Malibu 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure

    Object Number: 175767 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the stabilizer shaft. Refer to Stabilizer Shaft Replacement .
  3. Remove the insulator (4) from the stabilizer shaft (2).

    4. Object Number: 752143 Size: SH
  4. Remove the rear suspension support insulator from the rectangular stabilizer clamp hole.

Installation Procedure

    Object Number: 175767 Size: SH
  1. Install the insulator (4) to the stabilizer shaft (2).

    2. Object Number: 752143 Size: SH
  2. Install the rear suspension support insulator into the rectangular stabilizer clamp hole .
  3. Lower the vehicle.
  4. Install the stabilizer shaft to the vehicle. Refer to Stabilizer Shaft Replacement .