GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Malibu 🢒 Transmission/Transaxle 🢒 Shift Lock Control 🢒 Automatic Transmission Shift Lock Control Actuator Replacement

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  2. Remove the center console. Refer to Console Trim Plate Replacement in Instrument Panel, Gages and Console.

    3. Object Number: 190956 Size: SH
  3. Disconnect electrical connector from the shift lock control for the automatic transmission (AT).

    4. Object Number: 442716 Size: SH
  4. Remove both ends of the AT shift lock control from pivot points (1).

Installation Procedure

    Object Number: 442716 Size: SH
  1. Install the upper clip of the AT shift lock control onto the upper pivot point, and the lower clip onto the lower pivot point.
  2. Install the center console. Refer to Console Trim Plate Replacement in Instrument Panel, Gages and Console.
  3. Install the electrical connector to the AT shift lock control.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.