Before servicing or replacing lap and shoulder belts, including
single loop seat belt systems, refer to the following precautions:
| • | Clean the seat belt webbing with a mild soap and water solution
only, using a soft brush or cloth. |
| • | Do not bleach or dye the seat belt webbing. |
| • | Keep sharp edges and other damaging objects away from the seat
belts. |
| • | Replace any seat belts which are cut or damaged in any way. |
| • | Do not bend or damage any portion of the seat belt buckle or the
latch plate. |
| • | Start the anchor bolts and nuts by hand to ensure that they are
not cross-threaded. |
| • | Seat belts and retractors must be serviced as a set with service
replacement parts only. Do not attempt to make repairs to the individual components. |
| • | Do not remove the seat belt retractor cover. The seat belt retractor
cover and the long rivet securing the belt retractor cover to the retractor
are not available as service replacement parts. |
| • | Verify that the replacement part number is correct for the vehicle
at that seating position. Do not substitute a seat belt from a different seating
position. |
| • | Replace any seat belts which have a visible CAUTION label instructing
replacement. |
