GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Malibu 🢒 Restraints 🢒 Seat Belts 🢒 Seat Belt Height Adjuster Replacement - Front

Removal Procedure
  1. Remove the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement in Interior Trim.

    2. Object Number: 187379 Size: SH
  2. Remove the front seat belt shoulder guide track cover (2).
  3. Remove the front seat shoulder belt guide track bolts.
  4. Remove the front seat shoulder belt guide track (1) from the center pillar.

Installation Procedure

    Object Number: 187379 Size: SH
  1. Install the front seat shoulder belt guide track (1) to the center pillar.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the front seat shoulder belt guide track bolts.

    3. Tighten
    Tighten the bolts to 28 N·m (21 lb ft).

  3. Install the front seat shoulder belt guide track cover (2).
  4. Install the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement in Interior Trim.