Removal Procedure
- With a flat-bladed tool remove the ignition
switch trim cover.
- With a flat-bladed tool remove the accessory
trim plate from the from the I/P carrier.
- Disconnect the cigar lighter electrical connector from the
cigar lighter.
- Remove the cigar lighter from the accessory trim plate if required. Refer
to
Cigar Lighter Housing Replacement
.
Installation Procedure
- Install the cigar lighter to the accessory
trim plate if required. Refer to
Cigar Lighter Housing Replacement
.
- Connect the cigar lighter electrical connector to the cigar lighter.
- Align the accessory trim plate tabs to the I/P carrier.
- Press the accessory trim plate into the I/P carrier until retaining tabs
are engaged.
- Align the ignition key trim cover to the
ignition switch. Press the trim cover until retaining tabs are engaged.