GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Malibu 🢒 Body and Accessories 🢒 Doors 🢒 Door Handle Bezel Replacement

Removal Procedure

    Object Number: 748001 Size: SH
  1. Remove the door handle bezel screw (1) from the door handle bezel (2).
  2. Remove the door handle bezel (2) from the trim panel by lifting out at the front.

    3. Object Number: 445101 Size: SH
  3. Remove the power door lock switch (2) from the door handle bezel (3) by releasing the retaining tabs.
  4. Disconnect the electrical connector (1) from the power door lock switch (2).

Installation Procedure

    Object Number: 445101 Size: SH
  1. Connect the electrical connector (1) to the power door lock switch (2).
  2. Install the power door lock switch (2) to the door handle bezel (3).

    3. Press the switch (2) into the bezel (3) until the retaining tabs are engaged.


    Object Number: 748001 Size: SH
  3. Install the door handle bezel (2) to the trim panel by engaging the tabs.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the door handle bezel screw (1) to the door handle bezel (2).

    5. Tighten
    Tighten the screw to 2.3 N·m  (20 lb in).