Removal Procedure
- Using a flat-bladed tool
release the power accessory switch plate retainers (1).
Push in and lift up on the retainers (1) to remove the
switch plate from the door trim panel.
- Disconnect the electrical
connectors (2) from the power window switch.
- Release the power window switch retainers.
Push the
window switch out of the switch plate.
Installation Procedure
- Install the power window
switch to the accessory switch plate.
Press the window switch
into the switch plate until retaining tabs are fully seated.
- Connect the electrical connectors (2) to the power window
switch.
- Install the accessory
switch plate to the door trim panel.
Press the switch plate into
the door trim panel until the retainers (1) are fully seated.