1. Front Turn Signal

2. High-beam Headlamp

3. Low-beam Headlamp

To replace the high or low-beam bulbs, do the following:

1. Open the hood. See Hood Release for more information.



2. Pull directly up on the two latches carefully to unhook the headlamp assembly.
3. Remove the headlamp assembly from the vehicle by pulling it forward and away from the vehicle.



4. Unclip the wiring harness and turn the bulb socket less than one-quarter turn counterclockwise and remove it.
5. Pull the bulb from the socket.
6. Replace the old bulb with a new bulb.
7. Turn the bulb socket clockwise to secure.
8. Reconnect the wiring harness to the bulb socket.
9. Reinstall the headlamp assembly. Be sure to line up the holes in the headlamp assembly to the round ends of the mounting pins.
10. Press down on the two latches to secure the headlamp assembly in place.