Circuit Description
After replacing the power steering control module (PSCM) it must be setup with the correct steering tuning.
DTC Descriptor
This procedure supports the following DTC:
DTC C0569 System Configuration Error
This vehicle has DTCs which include DTC symptoms. For more information on DTC symptoms, refer to DTC Symptom Description in Vehicle DTC Information.
DTC Symptom | DTC Symptom Descriptor |
|---|---|
46 | Vehicle Configuration Not Programmed |
Conditions for Running the DTC
The ignition is ON.
Conditions for Setting the DTC
The PSCM has not undergone the steering tuning selection procedure.
Action Taken When the DTC Sets
| • | DTC C0569 46 is stored in memory. |
| • | The DIC displays the POWER STEERING warning message. |
| • | The PSCM defaults to steering tuning 1. |
Conditions for Clearing the DTC
| • | A current DTC will clear after the PSCM has been setup with the correct steering tuning. |
| • | A history DTC will clear after 100 consecutive malfunction free ignition cycles from when the PSCM has been setup. |
| • | Using a scan tool |
Diagnostic Aids
A newly replaced PSCM will set DTC C0569 46 on its initial ignition ON cycle.
Step | Action | Yes | No |
|---|---|---|---|
1 | Did you perform the vehicle diagnostic system? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
2 | Perform the steering tuning selection procedure. Refer to Control Module Setup . Did you complete the repair? | Go to Step 3 | -- |
3 |
Does the DTC reset? | Go to Step 2 | System OK |
