Video Display Replacement for Chevrolet Malibu 2004
Removal Procedure
- Remove the hinge cover. Refer to
Console Rear Trim Plate Replacement
in Instrument Panel, Gages and Console.
- Remove the video display hinge screws.
- Remove the video display wire harness connector.
- Remove the video display.
Installation Procedure
- Install the video display.
- Install the video display wire harness connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the video display hinge screws.
Tighten
Tighten the screws to 1 N·m (10 lb in).
- Install the hinge cover. Refer to
Console Rear Trim Plate Replacement
in Instrument Panel, Gages and Console.