Remote Control Door Lock Receiver Replacement Sedan

1. Open the rear compartment lid.
2. Working through the access hole, disconnect the electrical connectors from the receiver.



3. Working through the access hole, remove the receiver from the vehicle by depressing the retention tabs.

1. Install the receiver to the vehicle.
2. Connect the electrical connectors to the receiver.
3. The transmitter will need to be programmed after replacement. Refer to Transmitter Programming .

Remote Control Door Lock Receiver Replacement Extended Sedan

1. Remove the rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement in Interior Trim.
2. Disconnect the electrical connectors from the receiver.



3. Remove the receiver from the vehicle.

1. Install the receiver to the vehicle.
2. Connect the electrical connectors to the receiver.
3. Install the rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement in Interior Trim.
4. The transmitter will need to be programmed after replacement. Refer to Transmitter Programming .