Removal Procedure
- Remove the overhead console. Refer to
Roof Console Replacement
in Interior Trim.
- Remove the fasteners from the garage door opener.
- Disconnect the electrical connector and remove the garage door opener.
Installation Procedure
- Install the garage door opener and connect the electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the fasteners to the garage door opener.
Tighten
Tighten the fastener to 2.5 N·m (22 lb in).
- Install the overhead console. Refer to
Roof Console Replacement
in Interior Trim.
- Program the garage door opener after replacement. Refer to
Control Module References
in Computer/Integrating Systems.