Battery Negative Cable Disconnection and Connection for Chevrolet Malibu 2004
Removal Procedure
Caution: Refer to SIR Caution in the Preface section.
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Record all of the vehicle preset radio stations.
- Turn OFF all the lamps and the accessories.
- Make sure the ignition switch is in the OFF position.
- Disconnect the battery negative cable from the
battery.
- Remove the battery tray cover. Refer to
Battery Replacement
.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
Important: Clean any existing oxidation from the contact face of the battery terminal and
battery cable using a wire brush before installing the battery cable to the battery
terminal.
- Connect the battery negative cable to the battery.
Tighten
Tighten the bolt to 17 N·m (13 lb ft).
- Reset the radio stations and the clock.