Removal Procedure
- Remove the sunshade from the sunshade retainer.
- Remove the cover from the screws.
- Remove the screws.
- Remove the sunshade.
- Disconnect the electrical connector, if equipped.
Installation Procedure
- Connect the electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Position the sunshade and install the screws.
Tighten
Tighten the screws to 2.5 N·m (22 lb in).
- Install the cover to the sunshade screws.
- Install the sunshade to the sunshade retainer.