GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Malibu 🢒 Engine 🢒 Engine Controls - 3.5L (LX9) 🢒 Accelerator Pedal Replacement

Removal Procedure

    Object Number: 1544734 Size: SH
  1. Disconnect the accelerator pedal position sensor electrical connector.
  2. Remove the accelerator mounting bolts (1) from the accelerator bracket.
  3. Remove the accelerator assembly (2) from the vehicle.

Installation Procedure

    Object Number: 1544734 Size: SH
  1. Install the accelerator assembly (2) to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the accelerator mounting bolts (1) to the accelerator bracket.

    3. Tighten
    Tighten the accelerator pedal nuts to 10 N·m (89 lb in).

  3. Connect the accelerator pedal position sensor electrical connector.
  4. Confirm that the accelerator sensor connector locking clip is fully secured.
  5. Verify the operation of the accelerator pedal.