Liftgate Latch Replacement Early
Removal Procedure
- Open the liftgate.
- Remove the rear compartment sill panel.
- Remove the liftgate latch retaining bolts.
- Disconnect the electrical connector from the liftgate latch.
- Release the latch cable retainer and remove latch cable from liftgate latch.
- Remove the liftgate latch from the bracket.
Installation Procedure
- Install the liftgate latch to the bracket.
- Engage latch cable retainer.
- Connect the electrical connector to the liftgate latch.
Notice: Refer to Fastener Notice in the Preface section.
- Install the liftgate latch retainer bolts.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Install the rear compartment sill panel.
- Close the liftgate.