Compressor Pressure Relief Valve Replacement L61

Special Tools

J 39400-A Halogen Leak Detector

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
4. Remove the compressor pressure relief valve.

Notice: Refer to Fastener Notice in the Preface section.

1. Install the compressor pressure relief valve.




Tighten
Tighten to 8 N·m (70 lb in).

2. Lower the vehicle.
3. Connect the battery negative cable.
4. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging .
5. Leak test the fittings using the J 39400-A .