- Install the oil filter bypass valve.
- Install the oil filter bypass hold plug.
- Install the oil filter adapter.
- Apply threadlocker P/N 21485277 to the bolt threads if required.
- Install the oil filter adapter bolts.
- Install the oil filter.
Notice: Maximum gasket performance is achieved when using new fasteners, which contain a thread-locking patch. If the fasteners are not replaced, a thread locking chemical must be applied to the fastener threads. Failure to replace the fasteners or apply a thread-locking chemical MAY reduce gasket sealing capability.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the oil filter bypass hole plug to 19 N·m (14 lb ft).
Tighten
Tighten the oil filter adapter bolts to 25 N·m (18 lb ft).
Tighten
Tighten the oil filter to 30 N·m (22 lb ft).
