GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Malibu 🢒 Engine 🢒 Engine Electrical 🢒 Accelerator Pedal Position Sensor Replacement

Removal Procedure

    Object Number: 1544734 Size: SH
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  2. Remove the APP sensor bolts (1).
  3. Remove the APP sensor (2).

Installation Procedure

    Object Number: 1544734 Size: SH
  1. Install the APP sensor (2).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the APP bolts (1).

    3. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  3. Connect the APP sensor electrical connector.
  4. Confirm that the APP sensor connector locking clip is fully secured.