Removal Procedure
- Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
- Disconnect the positive battery cable from the battery.
- Remove the battery hold down retainer bolt and retainer.
Important: Do not tip the battery more than 40 degrees during removal.
- Remove the battery.
Installation Procedure
Important: Do not tip the battery more than 40 degrees during battery installation.
- Install the battery.
Notice: Refer to Fastener Notice in the Preface section.
- Install the battery hold down retainer and bolt.
Tighten
Tighten the bolt to 25 N·m (18 lb ft).
- Connect the positive battery cable to the battery.
Tighten
Tighten the bolt to 17 N·m (13 lb ft).
- Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.