Battery Voltage: The scan tool displays out of range / normal.
The scan tool displays the current battery state input.
Door Ajar Switch: The scan tool displays Door Closed / Door
Ajar / Volts. Display indicates the current status of the passenger door ajar switch.
Door Ajar indicates the door is open and closed indicates the door is closed.
Door Cylinder Switch: The scan tool displays Idle / Unlock /
Lock / Invalid / Volts. The scan tool displays unlock when the passenger door key
cylinder is rotated to the unlock position.
Door Lock Switch: The scan tool displays Idle / Unlock / Lock.
The scan tool displays unlock when the passenger door key cylinder is rotated to the
unlock position.
Driver Door Ajar Switch: The scan tool displays Door Closed
/ Door Ajar. The Scan tool display indicates the current status of the driver door
ajar switch. Door Ajar indicates the door is open and Door Closed indicates the door
is closed.
Driver Door Lock Actuator Command: The scan tool displays Idle
/ Unlock / Lock / Invalid which is the last state of the driver side door lock actuator.
Hood Ajar Switch: The scan tool displays Volts. Display indicates
the current voltage state of the Hood Ajar Switch.
Hood Ajar Switch: The scan tool displays Closed / Ajar. Display
indicates the current state of the Hood Ajar Switch. Ajar indicates the Hood is open
and Closed indicates the hood is closed.
Last Remote Function Actuator (RFA) Command Received: The scan
tool displays Engine Stop / Alarm Press / Alarm Hold / Fob 4 Unlock / fob 3 Unlock
/ Low Battery / Fob 2 Unlock / Fob 1 Unlock / Lock / Rear Release / Program / Fob
/ Programmed / Engine Start.
Park Lamp Request: The scan tool displays Off / On. The scan
tool displays the commanded state of the park lamp relay.
Passenger Doors Lock Actuator Request: The scan tool displays
Idle / Unlock / Lock / Invalid which is the last state of the passenger side door
lock actuator.
Remote Start Equipped: The scan tool displays Disabled / Enabled.
The scan tool displays if the remote start feature has been turned on for this vehicle.
Remote Start Request: The scan tool displays Yes / No.
RFX Link Input: The scan tool displays Low / High.
The scan tool displays the low or high signal from the transmitter to the Body Control
Module. The X Link is the signal to a class II body module with or without remote
start.
Run / Crank Relay: The scan tool displays Off / On. The scan
tool displays status of the Run /Crank Relay.
Trunk Ajar Switch: The scan tool displays trunk closed / trunk
ajar. The display indicates the current state of the trunk ajar switch only when the
content theft deterrent (CTD) system is in the armed mode. On indicates the trunk
ajar switch was active when the CTD was in the armed mode.
Content Theft Enabled: The scan tool displays Yes / No. The
scan tool displays Yes when the CTD system is armed and Off when the CTD system is
in standby.
Key Lock / Unlock Enabled: The scan tool displays Yes / No.
The scan tool displays Yes when the key cylinder is rotated to the lock position and
No when the key cylinder is rotated to the unlock position.