GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Malibu 🢒 Vehicle Control Systems 🢒 Computer/Integrating Systems 🢒 Console Replacement

Removal Procedure
  1. Remove the right console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .
  2. Remove the left console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Left Side .

    3. Object Number: 1207902 Size: SH
  3. Remove the front console screw covers from behind the console.
  4. Remove the front console screws.

    5. Object Number: 1207907 Size: SH
  5. Position the front seats to the full forward position.
  6. Remove the rear console bolts.
  7. Place the shifter in drive.

    8. Object Number: 1207906 Size: SH
  8. Remove the pen tray.

    9. Object Number: 1207909 Size: SH

    Important: Do not let the console contact the shifter handle or bezel.

  9. Disconnect the electrical connectors and remove the console.

Installation Procedure

    Object Number: 1207909 Size: SH

    Important: Do not let the console contact the shifter handle or bezel.

  1. Connect the electrical connectors and install the console.

    2. Object Number: 1207906 Size: SH
  2. Install the pen tray.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1207907 Size: SH
  3. Install the rear console bolts.

    4. Tighten
    Tighten the bolts to 1 N·m (10 lb in).

  4. Install the front console screws.

    5. Tighten
    Tighten the bolts to 1 N·m (10 lb in).


    Object Number: 1207902 Size: SH
  5. Install the front console screw cover.
  6. Install the left console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Left Side .
  7. Install the right console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .