For 1990-2009 cars only
- Reach around the tire, using the appropriate extension and socket.
- Loosen both strut to knuckle nuts just enough to allow for movement.
- If the strut has not been modified previously, perform the following steps before continuing with the wheel alignment:
- Adjust the camber to specification by moving the top of the wheel in or out. Refer to Wheel Alignment Specifications .
- Install the strut to knuckle nuts.
| 3.1. | Disconnect the strut from the knuckle. Refer to Strut Assembly Replacement . |
| 3.2. | File the lower hole until the outer flange slot matches the inner flange slot. |
| 3.3. | Connect the strut to the knuckle. Refer to Strut Assembly Replacement . |
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the nuts to 120 N·m (89 lb ft).
