GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Drain the washer solvent from the washer solvent container.
  2. Remove the front fender liner. Refer to Front Fender Liner Replacement in Body Front End.

  3. Object Number: 1207514  Size: SH
  4. Disconnect the washer pump electrical connector.
  5. Disconnect the washer pump hose (2) from the washer pump (5).
  6. Using a small flat-bladed tool, remove the washer pump from the washer solvent container (1).
  7. Using a small flat-bladed tool, remove the washer pump seal (6) from the washer solvent container (1).

Installation Procedure


    Object Number: 1207514  Size: SH
  1. Position the washer pump seal (6) to the washer solvent container (1), pressing in until fully seated.
  2. Position the washer pump (5) to the washer solvent container (1) pressing in until fully seated.
  3. Connect the washer pump electrical connector.
  4. Connect the washer pump hose (2) to the washer pump (5)..
  5. Install the front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  6. Fill the washer solvent container with washer solvent.
  7. Inspect the washers for proper operation.