GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Malibu 🢒 Body 🢒 Body Front End 🢒 Hood Rear Outer Seal Replacement

Removal Procedure
  1. Open the hood.

    2. Object Number: 1212311 Size: SH
  2. Pull the rear side hood seal, located at the end of the plenum to hood seal, from the air inlet grille panel.
  3. Remove the seal from the vehicle.
  4. Clean any adhesive from the air inlet grille panel and the hood hinge bracket using 3M™ P/N 8984.

Installation Procedure

    Object Number: 1212311 Size: SH
  1. Remove the protective backing paper from the adhesive on the rear side hood seal.
  2. With the rear side seal butted to the plenum-to-hood seal, press the side hood seal until the adhesive is fully adhered.
  3. Close the hood.