GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1315882  Size: SH
  1. Pull the weatherstrip (1) from the pinch-weld flange. Move the weatherstrip toward the lower corners and around the complete opening.
  2. Clean all of the adhesive from the pinch-weld flange.

Installation Procedure


    Object Number: 1315882  Size: SH
  1. Apply a bead of weatherstrip adhesive GM P/N 12345096 (Canadian P/N 993365) or equivalent to the edge of the pinch-weld flange and around the entire perimeter of the rear compartment opening.
  2. Install the center of the weatherstrip (1) onto the gutter flange. Begin at the forward center of the opening between the hinge arms.
  3. Push down on the weatherstrip over the entire area until fully seated.