GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Malibu 🢒 Body 🢒 Bumpers 🢒 Front Bumper Fascia Upper Support Replacement

Removal Procedure

    Object Number: 1219414 Size: SH
  1. Remove the push-in retainers from the upper grille.

    2. Object Number: 1219346 Size: SH
  2. Remove the bolts from the rear of the front fascia support.

    3. Object Number: 1219419 Size: SH
  3. Pull back the upper grille and remove the push-in retainers from the upper fascia support.

    4. Object Number: 1219403 Size: SH

    Important: The upper fascia support must clear the hood latch.

  4. Pull back the upper grille and remove the upper fascia support pulling up and forward.

Installation Procedure

    Object Number: 1219403 Size: SH

    Important: The upper fascia support must clear the hood latch.

  1. Pull back the upper grille and install the upper fascia support sliding down and back.

    2. Object Number: 1219419 Size: SH
  2. Pull back the upper grille and install the push-in retainers to the upper fascia support.

    3. Object Number: 1219414 Size: SH
  3. Install the push-in retainers to the upper grille.

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1219346 Size: SH
  4. Install the bolts to the rear of the front fascia support.

    5. Tighten
    Tighten the bolts to 10 N·m (89 lb in).