GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Malibu 🢒 Body 🢒 Doors 🢒 Rear Side Door Wiring Conduit Replacement

Removal Procedure

    Object Number: 459522 Size: SH

    Important: Mark the location and the color of the wires to the electrical socket before removing the wires.

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the conduit from the center pillar.
  3. Disconnect the rear door wiring harness electrical connector.
  4. Disconnect the wire harness retainer from the wiring harness socket.
  5. Remove the wiring harness wiring one at a time from the socket.
  6. Remove the rubber conduit from the rear door.
  7. Remove the wiring harness wiring from the rubber conduit.

Installation Procedure

    Object Number: 459522 Size: SH
  1. Install the rear door electrical harness through the rubber conduit.
  2. Install the rear door wiring harness wires to the electrical socket.
  3. Connect the rear door wiring harness electrical connector.

    4. Object Number: 459519 Size: SH
  4. Install the rubber conduit to the rear door.
  5. Install the rubber conduit to the center pillar.
  6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .