For 1990-2009 cars only
Removal Procedure
- Remove the sunroof window panel from the sunroof module. Refer to Sunroof Window Replacement .
- Close the sunshade to within a hand-width of full closure.
- From the top of the vehicle, push the sunshade toward the far side of the sunroof window track assembly.
- Carefully arch the sunshade upward at the center of the forward edge.
- Lift upward on the forward edge of the sunshade until the front sunshade guide is released from the track assembly.
- Slightly rotate the sunshade forward. Carefully arch the sunshade upward at the center of the rearward edge.
- Lift upward on the rearward edge of the sunshade until the rear sunshade guide is released from the track assembly.
- Lift upward and pull the sunshade to release the front and the rear guides from the track on the far side.
- Remove the sunshade from the sunroof module. Ensure that the guides are still retained to the tabs on the sunshade.
Installation Procedure
- If you are replacing the sunroof sunshade, transfer the 4 sunshade guides from the original sunshade to the new part.
- When installing the guides into the track assembly, lightly push down on the guide's top spring feature, allowing the guide to seat in the track.
- From the top of the vehicle, install the sunshade and the sunshade guides into the track assembly on the far side.
- Carefully arch the sunshade upward at the center of the rearward edge.
- Lift upward on the rearward edge of the sunshade until the rear sunshade guide can be positioned and seated into the track assembly.
- Slightly rotate the sunshade forward. Carefully arch the sunshade upward at the center of the forward edge.
- Lift upward on the forward edge of the sunshade until the front sunshade guide can be positioned and seated into the track assembly.
- Inspect the sunshade for proper operation.
- Install the sunroof window panel. Refer to Sunroof Window Replacement .
