Front Seat Adjuster Motor Replacement Tilt

Caution: Refer to SIR Caution in the Preface section.

1. Place the seat in the full up position to relieve tension on the motor.
2. Remove the front seat. Refer to Front Seat Replacement - Bucket .



3. Disconnect the electrical connectors.



4. Remove the seat motor fastener.



5. Remove the seat motor roll pin.



6. Remove the seat motor.

1. Install the seat motor.



2. Install the seat motor roll pin.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the seat motor fastener.

Tighten
Tighten the fastener to 7 N·m (62 lb in).




4. Connect the electrical connectors.
5. Install the front seat. Refer to Front Seat Replacement - Bucket .