GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Malibu 🢒 Body 🢒 Wipers/Washer Systems 🢒 Rear Window Wiper Arm Replacement

Removal Procedure

    Object Number: 1523824 Size: SH
  1. Raise the rear wiper arm finish cap to expose the wiper arm nut.
  2. Remove the rear wiper arm nut (1).
  3. Lift the rear wiper arm assembly (2) away from the rear window and remove the wiper arm from the pivot shaft.

Installation Procedure

    Object Number: 1523824 Size: SH
  1. Position wiper arm assembly (2) to the wiper shaft.
  2. Align the wiper blade to the void in the rear window blackout.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the rear wiper arm nut (1).

    4. Tighten
    Tighten the nut to 13 N·m (10 lb ft).

  4. Close the rear wiper arm finish cap.
  5. Operate the rear wipers and inspect for proper operation.