Removal Procedure
- Remove the case side cover. Refer to
Control Valve Body Cover Replacement
.
- Disconnect the torque converter clutch (TCC) solenoid electrical connector.
- Remove the TCC solenoid retaining clip (314)
- Remove the TCC solenoid (315).
Installation Procedure
- Install the TCC solenoid (315).
- Install the TCC solenoid retaining clip (314).
- Connect the TCC solenoid electrical connector.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will
need to relearn TAP values. Transmission performance may be affected as new TAP values are learned. Reset the TAP values. Refer to
Transmission Adaptive Functions
.
- Install the case side cover. Refer to
Control Valve Body Cover Replacement
.