Tools Required

1. Remove the drive belt from the power steering pump pulley. Refer to Drive Belt Replacement for the 3.5L engine, or Drive Belt Replacement for the 3.9L engine.
2. If the vehicle is a convertible, remove the engine mount bracket. Refer to Engine Mount Bracket Replacement for the 3.5L engine, or Engine Mount Bracket Replacement for the 3.9L engine.



3. Remove the power steering pump pulley using the J 25034-C .

1. Install the power steering pump pulley to the pump using the J 25033-C . Ensure that the face of the pulley hub is flush with the pump drive shaft.
2. Install the drive belt to the power steering pump pulley. Refer to Drive Belt Replacement for the 3.5L engine, or Drive Belt Replacement for the 3.9L engine.
3. If the vehicle is a convertible, install the engine mount bracket. Refer to Engine Mount Bracket Replacement for the 3.5L engine, or Engine Mount Bracket Replacement for the 3.9L engine.
4. Fill the power steering pump with power steering fluid. Refer to Checking and Adding Power Steering Fluid .
5. Bleed the power steering system. Refer to Power Steering System Bleeding .