Video Display Malfunction for Chevrolet Malibu 2007
Schematic Reference:
Radio/Navigation System Schematics
.
Diagnostic System Check - Entertainment System
Perform the Vehicle Diagnostic System Check before proceeding with these diagnostic procedures. Refer to
Diagnostic System Check - Vehicle
.
Scan Tool Parameter
The scan tool parameter video signal, in the DVD data display list can be useful in diagnosing this fault. The video signal parameter displays present or not present based on whether the DVD player senses a signal on the video signal circuit. The scan
tool parameter may be helpful when diagnosing a poor video display when using an auxiliary device.
Video Display is Blank
Important: The following information lists the most probable cause of the concern to the least probable cause. If the list leads to the replacement of a component, always inspect for a poor connection before proceeding with replacement.
Refer to
Testing for Intermittent Conditions and Poor Connections
and
Connector Repairs
.
| • | VSM +8v circuit open or high resistance between the DVD player and the video display--Test the VSM +8v circuit for an open or high resistance. Refer to
Circuit Testing
and
Wiring Repairs
. |
| • | Ground circuit open or high resistance between the DVD player and the video display--Test the ground circuit for an open or high resistance. Refer to
Circuit Testing
and
Wiring Repairs
. |
| • | Video signal circuit open or high resistance between the DVD player and the video display--Test the video signal circuit for an open or high resistance. Refer to
Circuit Testing
and
Wiring Repairs
. |
| • | Bright control circuit short to ground between the DVD player and the video display--Test the bright control circuit for a shot to ground. Refer to
Circuit Testing
and
Wiring Repairs
. |
Video Display is White
| • | Ground circuit shorted to B+ between the DVD player and the video display--Test the ground circuit for a short to B+ . Refer to
Circuit Testing
and
Wiring Repairs
. |
