GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Engine 🢒 Engine Controls and Fuel - 2.4L 🢒 Air Cleaner Inlet Duct Replacement

Air Cleaner Inlet Duct Replacement 2nd Design


Object Number: 1975970 Size: MF

Callout

Component Name

Preliminary Procedure

Remove the right front fender liner. Refer to Front Wheelhouse Panel Splash Shield Replacement .

1

Push Pin (Qty: 2)

2

Air Cleaner Inlet Duct

Air Cleaner Inlet Duct Replacement 1st Design

Removal Procedure

    Object Number: 1890380 Size: SH
  1. Remove the right tire and wheel. Refer to Tire and Wheel Removal and Installation .
  2. Remove the front wheelhouse panel splash shield . Refer to Front Wheelhouse Panel Splash Shield Replacement .
  3. Remove the air cleaner inlet duct bolt (1) and push pin retainer (3).
  4. Remove the air cleaner inlet duct (2).

Installation Procedure

    Object Number: 1890380 Size: SH
  1. Position the air cleaner inlet duct (2) to the side rail.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the air cleaner inlet duct bolt (1) and push pin retainer (3).

    3. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  3. Install the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement .
  4. Install the right tire and wheel. Refer to Tire and Wheel Removal and Installation .