GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Engine 🢒 Engine Mechanical - 2.4L 🢒 Engine Mount Replacement

Removal Procedure

    Object Number: 1890869 Size: SH
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Support the engine with a hydraulic floor jack. Use a piece of wood between the floor jack and the oil pan.
  3. Remove the engine mount to bracket bolts (1).
  4. Remove the engine mount to side rail bolts (2).
  5. Remove the engine mount from the engine compartment.

Installation Procedure

    Object Number: 1890869 Size: SH
  1. Place the engine mount onto the side rail studs.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the engine mount to side rail bolts (2).

    3. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

    Important: The engine mount to bracket bolts must be hand started. Do not pry the engine mount to align the holes.

  3. Install the engine mount to bracket bolts (1).

    4. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  4. Remove the hydraulic floor jack from under the oil pan.
  5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .