GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Engine 🢒 Engine Mechanical - 2.4L 🢒 Generator Control Module Cover Replacement

Removal Procedure

    Object Number: 1891201 Size: SH
  1. Open the hood.
  2. Grasp the generator control module cover by the left side and lift up in order to disengage the cover from the ball studs.
  3. Remove the generator control module cover tab from the battery tray slot.
  4. Remove the generator control module cover (1).

Installation Procedure

    Object Number: 1891201 Size: SH
  1. Place the generator control module cover (1) tab into the battery tray slot.
  2. Set the cover over the ball studs and press down on the cover directly over the ball studs in order to secure the cover.
  3. Close the hood.