GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Engine 🢒 Engine Mechanical - 3.5L 🢒 Engine Mount Bracket Replacement

Removal Procedure

    Object Number: 1774607 Size: SH
  1. Remove the engine mount. Refer to Engine Mount Replacement .
  2. Remove the engine mount bracket bolts (1, 3) from the engine.
  3. Remove the engine mount bracket (2).

Installation Procedure

    Object Number: 1774607 Size: SH
  1. Position the engine mount bracket to the engine.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Loosely install the engine mount bracket bolts.
  3. Hold the engine mount bracket firmly to the front of the engine and snug the oil pan bolts (3) so that the bracket is just seated to the oil pan.
  4. Tighten the engine mount bracket to engine bolt.

    5. Tighten
    Tighten the bolt to 90 N·m (66 lb ft).

  5. Tighten the engine mount bracket to oil pan bolts.

    6. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  6. Install the engine mount. Refer to Engine Mount Replacement .