For 1990-2009 cars only
Removal Procedure
- Remove the oil fill cap (1).
- Grasp the cover by the upper left and the lower right corners and lift up, disengaging the cover grommets from the ball studs.
- If necessary, lift upward on front of cover, then reach under center of cover disengaging the cover grommet for the ball stud.
Installation Procedure
- If necessary, place the cover into position over the ball stud. Press down near the center of the cover, engaging the cover to the ball stud.
- Place the cover into position over the ball studs. Press down near the upper left and the lower right corners, engaging the cover to the ball studs.
- Install the oil fill cap (1).
