Power Brake Booster Vacuum Sensor Replacement. Chevrolet Malibu 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Power Brake Booster Vacuum Sensor Replacement

Callout	Component Name
Preliminary Procedures Turn the ignition switch to the OFF position. Apply the brake pedal several times until the brake pedal becomes firm to deplete the power brake booster vacuum reserve. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1	Power Brake Booster Vacuum Sensor Electrical Connector
2	Power Brake Booster Vacuum Sensor Tip If necessary, a small amount of denatured alcohol can be used as an assembly aid for installing the power brake booster vacuum sensor to the brake booster. Do not use soap.

Callout

Component Name

Preliminary Procedures

Turn the ignition switch to the OFF position.
Apply the brake pedal several times until the brake pedal becomes firm to deplete the power brake booster vacuum reserve.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

Power Brake Booster Vacuum Sensor Electrical Connector

Power Brake Booster Vacuum Sensor

Tip
If necessary, a small amount of denatured alcohol can be used as an assembly aid for installing the power brake booster vacuum sensor to the brake booster. Do not use soap.