Checks | Cause | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ECM Torque Related DTC's are set. | DTC's can cause the engine torque value used by the TCM to become invalid. When the engine torque is invalid, the TCM will command maximum line pressure to protect the transmission. | ||||||||||
Oil Level | High or Low; correct as required | ||||||||||
| Stuck | ||||||||||
Pressure Control Solenoid (312) |
| ||||||||||
Torque Signal Regulator Valve (309) | Stuck | ||||||||||
Transmission Wiring Harness (11) |
| ||||||||||
Pressure Switch Assembly |
| ||||||||||
Throttle Position Sensor |
| ||||||||||
Oil Filter (85) | Clogged, broken, or loose | ||||||||||
Oil Filter Seal (84) | Leaking | ||||||||||
Cooler Lines | Clogged or restricted | ||||||||||
Cooler Line Seals (49) | Leaking | ||||||||||
Oil Pump (10) | Damaged, sticking, porous, or leaking | ||||||||||
Oil Pump Drive Shaft (19) | Damaged | ||||||||||
Pressure Relief Valve (214) | Damaged spring or missing ball | ||||||||||
|
|