Removal Procedure
- Remove the fuel pump module assembly. Refer to
Fuel Pump Module Replacement
.
- Remove the fuel level sensor wiring harness from the clip (2) on the module.
- Disconnect the fuel level sensor electrical connector from the pump module electrical connector.
- Push the tab (1) on the sensor in towards the sensor and remove the level sensor from the module alignment feature (3).
Installation Procedure
- Connect the fuel level sensor electrical connector to the pump module electrical connector.
- Align the tab opening on the rear of the fuel level senor with the module alignment feature (3).
- Press the tab (1) on the sensor out away from the sensor securing the sensor to the module.
- Install the fuel level sensor wiring harness to the clip (2) on the module.
- Install the fuel pump module assembly. Refer to
Fuel Pump Module Replacement
.