Preliminary Procedures

1. Open the doors to the side the lower rocker panel will be serviced from.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

1

Wheelhouse Liner Front and Rear Screw (Qty: 3)

2

Wheelhouse Liner Rear Retainer

Use a suitable retainer release tool in order to remove the retainers.

3

Rocker Panel Molding Retainer Lower (Qty: 6)

4

Rocker Panel Molding Retainer Upper (Qty: 11)

5

Rocker Panel Molding Assembly

Procedure

1. Upon installation, locate and secure the rear four way retainer to the rear flange.
2. Position and secure the center upper portion of the rocker panel molding retainers.
3. Position and secure the front upper portion of the rocker panel molding retainers.
4. Secure the bottom retainers.
5. Install the screws and rear wheelhouse retainer.