Rear Side Marker Lamp Replacement. Chevrolet Malibu 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Body Systems 🢒 Lighting 🢒 Rear Side Marker Lamp Replacement

Callout	Component Name
Preliminary Procedure Remove the rear wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement .
1	Rear Bumper Fascia Screw Notice: Refer to Fastener Notice in the Preface section. Tip The screw is hidden under the inside edge of the bumper fascia. Tighten 10 N·m (89 lb in)
2	Rear Side Marker Lamp Procedure Flex the front edge of the rear bumper fascia outward far enough in order to access the electrical connector and the locking tab on the lamp assembly. Disconnect the electrical connector from the lamp socket. Depress the locking tab rearward towards the lamp socket and pull the front edge of the lamp out first. Disengage the lamp from the rear bumper fascia.

Callout

Component Name

Remove the rear wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement .

Rear Bumper Fascia Screw

Notice: Refer to Fastener Notice in the Preface section.

Tip
The screw is hidden under the inside edge of the bumper fascia.

Tighten
10 N·m (89 lb in)

Rear Side Marker Lamp

Flex the front edge of the rear bumper fascia outward far enough in order to access the electrical connector and the locking tab on the lamp assembly.
Disconnect the electrical connector from the lamp socket.
Depress the locking tab rearward towards the lamp socket and pull the front edge of the lamp out first.
Disengage the lamp from the rear bumper fascia.