Preliminary Procedure

Remove the rear wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement .

1

Rear Bumper Fascia Screw

Notice: Refer to Fastener Notice in the Preface section.

Tip
The screw is hidden under the inside edge of the bumper fascia.

Tighten
10 N·m(89 lb in)

2

Rear Side Marker Lamp Bulb Socket

Procedure

1. Flex the front edge of the rear bumper fascia outward far enough in order to access the electrical harness connector and bulb socket.
2. Disconnect the electrical harness connector from the bulb socket.
3. Rotate the bulb socket counterclockwise and remove from the rear side marker lamp assembly.

3

Rear Side Marker Lamp Bulb