GM Service Manual Online
For 1990-2009 cars only

Object Number: 2002129  Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side.
  2. If eqipped with adjustable pedals, Remove the intermediate steering shaft bolt and position the intermediate steering shaft away from the steering column in order to gain access to the brake pedal adjustment position sensor. Refer to Intermediate Steering Shaft Replacement.

1

Brake Pedal Position Sensor Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Brake Pedal Position Sensor

Procedure

  1. Disconnect the electrical connector.
  2. Calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration