GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Washer Solvent Level Indicator Replacement

Removal Procedure
  1. Remove the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement .

    2. Object Number: 1207514 Size: SH
  2. Disconnect the washer solvent container level sensor electrical connector.
  3. Using a small flat-bladed tool, remove the washer solvent level indicator (4) from the washer solvent container (1).
  4. Contain all lost windshield washer solvent into a suitable clean container.
  5. Using a small flat-bladed tool, remove the level indicator seal (3) from the washer solvent container (1).

Installation Procedure

    Object Number: 1207514 Size: SH
  1. Position the level indicator seal (3) to the washer solvent container (1), pressing in until fully seated.
  2. Using full strength windshield washer solvent on the seal, position the washer solvent level indicator (4) to the washer solvent container (1), pressing in until fully seated.
  3. Connect the washer solvent level indicator electrical connector.
  4. Install the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement .
  5. Fill the washer solvent container with windshield washer solvent .